Wellsure Healthcare 5 Ltr Capacity Plastic ULV Fogger Machine WSH-1615

Specifications:-

Body & Tank : Nylon Glass filled Body.
Tank Capacity : 5 Litre of Chemical Storage
Blower Motor : >26000 RPM Motor
Nozzle : 1 Counter Rotating Vortex Nozzle
Chemicals : Can atomize both oil-based and water-based liquids.
Control Valve : One turn. Brass Valve
Particle Size : 0.5 – 1. Viscosity and density can affect particle size.
Range : Visible fog, 20-40 ft Input : 230V 50Hz Single Phase AC Supply
Dimensions : [ 33 x 41 x 23.5 cm ] L x H x Dia
Net. Weight : 4.50 Kg ( Approx.)

Features:-

Max. area coverage as compared to any other conventional fogger.
Nylon , Heavy duty Plastic Body.
Chemical Level Indicator.
Comes with pre-fitted liquid flow control valve for ease of use.
100% Convenient, Portable & Easy to use.
Supplied with Inbuilt Manual Timer Extension for time interval adjustment for operation , after a fix interval of schedule time it will automatically off.

Typical Uses Of Fogging Machine Includes :-

Humidification (Fogging Water)
Odour Control (Fogging odour Neutralizers, Scents or Masking chemicals)
Applications Of Insecticides
Application Of Germicides or Sanitizing Chemicals For Cleaning & Sanitation Purposes
Control Of mold and mildew ( Applying Sporicides, Fungicides or anti-mildew Chemicals)

This fogger atomize liquid into small droplets by shearing them in high turbulent section of nozzle. A low rate [30-60 ml per minute] produces a dry fog of small droplets that float extensively and diffuse widely. Larger flow rate [120-150 ml per minute] produce progressively larger droplets. Liquid flow rate is regulated by a control valve to alternate the droplet size.

HOW TO USE

1.Add chemical solution to the liquid tank.
2.Plug the fogger power cord into a grounded power outlet.
3.Using the calibrated flow rate and dosage instructions provided by the chemical manufacturer, calculate the time required to properly fog the area.
4.Adjust the angle of the fogger power head for the space you are treating (point the nozzle slightly up for max distance)
5.Aim the fog output towards area requiring treatment. For space fogging select the direction of greatest clearance so fog droplets can fill the space (droplets that hit something will condense).
6.Confirm the flow control valve is set to desired setting, and turn on the fogger.

CLEANING THE FOGGER:-

A) Normal Cleanup: When Fogging is complete, remove the suction tube from the liquid source and operate the fogger for one minute with valve full open. This will expel any liquid remaining in the fogger’s internal lines. Transfer excess chemical from tank to an appropriate container .
B) Cleanup of Difficult Liquids: After fogging a viscous liquid, emulsion or a solid suspension, begin with a normal cleanup (Step A). Then put suction tube into an appropriate solvent for your fogging chemical (water for water-dispersible liquid, kerosene for oil based liquids) and operate for 1-2 minutes flushing residual chemicals with clean solvents. Then again repeat Step A.
C) Cleanup for Long Term Storage: Remove all the liquid from the tank to eliminate the potential for long term chemical attack on tank, suction tube or tubing. Then follow Step A or B.